ZENNIO
ZIO-BIN44
BIN 44. Universal Interface 4 binary inputs and 4 LED outputs
Product code:
ZIO-BIN44
BIN 44 is a module with 4 binary inputs and 4 LED outputs. Binary inputs can be configured as sensors, switches or potential-free push buttons. Binary outputs can be used for low current LED control. Installation in standard mounting box.
Description
- 4 binary inputs
- 4 outputs configurable as:
- LED output.
- Solid-state switch control output.
- Total data saving on power failure.
- Integrated KNX BCU.
- Device to be mounted inside distribution, junction or wall back boxes.
- Reduced size: 39 x 39 x 10.5mm.
- CE directives compliant.
Technical Details
Specification
General System Specifications
- KNX Power Supply: 29VDC
- KNX Current Consumption: 12.4mA @ 29VDC
- Connection type: Typical bus connector TP1, 0.50 mm2 section
- Operating temperature: 0 ¡C to 55 ¡C
- Assembly: Device to be mounted inside distribution, junction or wall box
- KNX bus failure response: Data saving according to parameterization.
- KNX bus restart response: Data saving according to parameterization.
- Operation Indicator: Programming LED indicates programming mode (red)
Outputs
- Number of outputs: 4 outputs
- Number of outputs per common: 4
- Output voltage: Adapted to the load up to a maximum value of 12VDC for each output
- Output current: 2.0mA
- Connection method:10-wire connector with cable (included)
- Max. cable length: 30 m @ 1mm2
- Cable cross-section: 0.08 mm2 (28 AWG)
Inputs
- Number of inputs per common: 4
- Input voltage: +3.3V DC for the common
- Input current: Limited to 1mA
- Switching type: Dry voltage contacts between input and common
- Connection method:10-wire connector with cable (included)
- Max. cable length: 30 m @1mm2
- Cable cross-section: 0.08 mm2 (28 AWG)
- Response time: Max 10ms
Properties
Properties
| Technology | KNX |
| Brand | ZENNIO |
| Mounting | Recessed |
| Inputs | 4 |
| Operating voltage | KNX Bus (29VDC) |
| Outputs | 4 |
| IP rating | IP20 |
