LB Management, Rotary dimmer universal LED
Description
Intended use
- Switching and dimming of lighting
- Operation with suitable cover
- Installation in flush box according to EN 60670-1
Product characteristics
- Device works according to the leading edge phase control or trailing edge phase control principle
- Automatic or manual setting of the dimming principle suitable for the load
- Display of the set operating mode by means of LED
- Device can be operated without neutral conductor
- Switch-on via bulb-preserving soft start
- Switch-on with last brightness or saved switch-on brightness
- Switch-on brightness can be saved permanently
- Minimum brightness can be saved permanently
- Connection of satellite units possible
- Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest
- Electronic over-temperature protection
- Key card function
- Power extension possible by means of power boosters (ref.-no. ULZ 1755 REG)
- Optional accessory: compensation module LED, ref.-no.: KM LED 230 U
Suitable Centre plates:
AS / A ranges: ref.-no. A 1540 ..
CD range: ref.-no. CD 1540 ..
SL range: ref.-no. SL 1540 ..
LS range: ref.-no. LS 1940 .., .. 1940 ..
Technical Details
Specification
Rated voltage: AC 230 V ~
Mains frequency: 50/60 Hz
Stand-by power: approx. 0.35 W
Power loss: approx. 4 W
Ambient temperature: −5 ... +45 °C
Connected load at 25 °C
Incandescent lamps: 20 ... 420 W
HV halogen lamps: 20 ... 420 W
Electronic transformers: 20 ... 420 W
Electronic transformers with LV LED: typical 20 ... 100 W
Inductive transformers: 20 ... 420 VA
Inductive transformers with LV LED: typical 20 ... 100 VA
Dimmable HV LED lamps: typical 3 ... 100 W
Dimmable compact fluorescent lamps: typical 3 ... 100 W
Operating mode LED trailing edge phase control: Rated power for HV LED lamps, typ. 3 ... 400 W, electronic transformers with LV LED typ. 20 ... 200 W.
Ohmic-capacitive: 20 ... 420 W
Capacitive-inductive: not permitted
Ohmic-inductive: 20 ... 420 VA
Ohmic and HV LED: typical 3 ... 100 W
Ohmic and CFL: typical 3 ... 100 W
Amplifiers: see instructions for amplifier
Connection: screw terminals
single wire: 1 x 0.5 ... 4.0 mm²
2 x 0.5 ... 2.5 mm²
stranded without ferrule: 1 x 0.5 ... 4.0 mm²
2 x 0.5 ... 2.5 mm²
stranded with ferrule: 1 x 0.5 ... 4.0 mm²
2 x 0.5 ... 1.5 mm²
Number of satellite units
Rotary satellite insert 3-wire 1733 DNE: 10
Satellite insert 3-wire 1723 NE: 10
Satellite insert 2-wire 1720 NE: unlimited
Push-buttons: unlimited
Total length of extension unit cable: max. 100 m
Total length power cable: max. 100 m
Properties
Properties
| Technology | Standard Electrics |
| Brand | JUNG |
