JUNG
2099REGHE
KNX DALI gateway TW
Product code:
2099REGHE
Controlling of luminaires and other applications with DALI operating device in KNX installations e.g. electronic ballast
Description
Intended use
- Controlling of luminaires and other applications with DALI operating device in KNX installations e.g. electronic ballast
- Mounting on DIN rail according to EN 60715 in distribution boxes
Product characteristics
- Control of up to 64 DALI devices in up to 32 groups
- Setting of colour temperature for luminaires with DALI Device Type 8 for tunable white acc. to IEC 62386-209
- Suitable for operation in emergency lighting systems
- Individual, group or central addressing
- 16 light scenes
- Effect control for dynamic lighting effects or colour games
- Read out DALI device state via KNX, e.g. brightness or luminaire error
- Manual operation of the DALI groups
- Restraint function
- Feedback of switching state and brightness value in bus and manual mode
- Collective feedback
- Central switching function
- Disabling function for each DALI group
- Separate ON and OFF delay
- Staircase lighting timer with pre-warning function
- Corridor function: when combined with motion detectors, reduced continuous lighting, if no motion is detected
- Online or offline project design of the DALI devices with ETS plug-in
- Short-circuit protection
- Surge voltage protection
- Overload protection
- Operating hours counter
- Signal of the global switching status of the DALI devices, e.g. to switch off the mains voltage of the DALI devices to avoid standby losses
- An individual DALI device can be exchanged during operation without software
- Linear or logarithmic dimming characteristic can be selected
Technical Details
Specification
Rated voltage: AC 110 ... 240 V ~, 50/60 Hz
Rated voltage: DC 110 ... 240 V
Power loss: max. 3 W
Ambient temperature: _5 ... +45 ÁC
Storage/transport temperature: _25 ... +70 ÁC
Rated voltage DALI: DC 16 V
Number of DALI devices: max. 64
DALI transmission rate: 1.2 kbit/s
DALI protocol: EN 62386
Cable type: Sheathed cable 230 V, e,g. NYM
Cable length DALI
- with 1.5 mm_: max. 300 m
- with 1.0 mm_: max. 238 m
- with 0.75 mm_: max. 174 m
- with 0.5 mm_: max. 116 m
Mounting width: 72 mm (4 rail units)
Connection, power supply and DALI
- Connection mode: screw terminals
- single wire: 1 x 0.5 ... 4 mm_
- stranded without ferrule: 1 x 0.5 ... 4 mm_
- stranded with ferrule: 1 x 0.5 ... 2.5 mm_
KNX medium: TP 256
Rated voltage KNX: DC 21 ... 32 V SELV
Power consumption KNX: typical 150 mW
Connection, KNX: terminal
Properties
Properties
| Technology | KNX |
| Brand | JUNG |
| Mounting | DIN Rail |
| Mounting Width | 4MW |
