KNX Analog Actuator, 4-gang

Description

The analogue output needs 24 V AC for operation. The necessary power can be supplied by a 24V power supply such as HDR-30-24.

• The analogue output converts measuring data received via KNX telegrams (DPT-ID 9.0xx and 5.010) into analogue output signals.
• The analogue output signals enable heating, ventilation and air conditioning units to adapt their output values to information received from the bus and thus to take part in control processes.
• Voltage signals: 0 ... 1 V DC 0 ... 10 V DC
• Current signals: 0 ... 20 mA DC 4 ... 20 mA DC
• The analogue output offers four analog outputs which can be software-parameterised for one of the ranges mentioned above. Outputs not used can be deactivated.
• The output variables can be force-controlled from a coordinating control system.
• With an analogue output extension module, the number of analog outputs can be increased from 4 to 8.
• In conjunction with the dimming function of a sensor, both, the analogue output and also the analogue output extension module can be used as an active control unit for dimming applications.

Remarks on the hardware:

• The GND terminals must not be connected to the corresponding terminals of another device.
• The outputs of the analogue output and of the analogue output extension module must not be connected to the 1 ... 10 V interface of electronic ballasts or electronic transformers.
• All connected components must ensure safe separation from other voltages

Technical Details

Documents & Downloads