JUNG
2514REGHE
KNX blinds actuator, 4-gang AC 110-230 V, 2-gang DC 12-48 V
Product code:
2514REGHE
Blind actuator that can be configured for 4 x 230V blinds or 2 x 12-48VDC blind. Current detection to establish end stops.
Description
Intended use
- Switching of electrically driven blinds, shutters, awnings and similar hangings for AC 110-230 V mains voltage or DC 12-48 V extra-low voltage.
- Mounting on DIN rail in distribution boxes
Product characteristics
- Suitable for 110-230 V AC motors and 12-48 V DC motors
- Automatic operation time detection for 230 V motors can be set
- Slat position directly controllable
- Acknowledgement of travelling state and slat position in bus and manual mode
- Light scene function
- Top and bottom forced position via higher-level controller
- Sun protection function
Only with the ETS 3.0d version or later versions the full functionality will be available.
Blind/shutter correction for lower end position (e.g. for ventilation position for roller blinds)
Technical Details
Specification
Outputs: 4 channels AC 110 ... 230 V, 2 channels DC 12 ... 48 V
Power supply mains: AC 110 V (_10 %) ... 240 V (+10 %)
Mains frequency: 50/60 Hz
Connection
- Connection mode: screw terminals
- single wire: 0.5 ... 4 mm_
- stranded without ferrule: 0.5 ... 4 mm_
- stranded with ferrule: 0.5 ... 2.5 mm_
Breaking capacity AC1: 6 A (230 V)
Switching current DC 12/24 V: 6 A
Switching current DC 48 V: 3 A
Max. blind/shutter running time: 20 min
Power loss: max. 4.5 W
Ambient temperature: _5 ... +45 C
Storing temperature: _25 ... +70 C
Approvals: VDE
Properties
Properties
| Technology | KNX |
| Brand | JUNG |
| Mounting | DIN Rail |
| Operating voltage | KNX Bus (29VDC) |
| Outputs | 4 |
| Mounting Width | 4MW |
