KNX universal dimming actuator, 1-gang

Description

Intended use

• Switching and dimming of lighting
• Reading in switching states of installation switches or push-buttons and other floating contacts at inputs 1...3
• Signal evaluation of condensation (ref.-no.: BTS 01) and leakage sensors (ref.-no.: LES 01) at inputs 1...3
• Acquisition of temperature values via NTC temperature sensor at input 3 (ref.-no.: FF 7.8)
• Installation in flush box according to EN 60670-1

Product characteristics

• Output can be operated via KNX telegrams or extension inputs
• Three extension inputs for connecting floating contacts or dew/leakage sensors. NTC temperature sensor can be connected to input 3.
• Supply via bus, no additional power supply necessary
• KNX Data Secure compatible
• Can be updated with the ETS Service App

• Automatic or manual setting of the dimming principle suitable for the load
• Protected against no-load, short-circuit and overheating
• Signal in the event of a short-circuit
• Feedback of the switching position and the dimming value
• Parameterisable switch-on and dimming behaviour
• Time functions: switch-on delay, switch-off delay, staircase lighting timer with pre-warning function
• Light scene operation
• Operating hours counter
• Power failure longer than approx. 5 seconds leads to switch-off of the dimmer actuator. Depending on the parameter setting, the connected load is calibrated after voltage return.
• Power extension possible by means of power boosters (ref.-no. ULZ 1755 REG)

• Operating functions switching, dimming (including colour temperature), controlling blinds, value transmitter (1 byte, 2 byte, 3 byte and 6 byte incl. RGBW und colour temperature presets), scene extension etc.
• Disabling function
• Debounce time adjustable

• Logic gates
• Transformer (conversion)
• Disabling element
• Comparator
• Limit value switch

Technical Details

Documents & Downloads