KNX dimming actuator 1-gang 200 W with 3-gang binary input
Description
Depending on the ETS parameterisation in the application for switches, buttons or contacts, inputs 1 and 2 either act internally on the relay output or separately on the KNX. Input 3 always acts on the KNX.
Functions for the inputs when acting on the KNX (switching, dimming, blind, value transmitter, scene auxiliary unit, 2-channel operation, controller auxiliary unit, no function).
Switching: Command for closing and opening of the contact adjustable (no reaction, ON, OFF, TOGGLE).
Dimming: Dimming of brightness and/or colour temperature. Command for closing the contact, time between switching and dimming, dimming in different steps, telegram repetition in case of long signal at the input, and sending of a stop telegram at the end of the dimming process all configurable.
Blinds: Command for closing the contact and the operating concept can be parameterised. Times for short and long signal at input and slat adjustment are adjustable.
Value transmitter: Functionality as 1-byte, 2-byte, 3-byte or 6-byte value transmitter including colour temperature and colour value transmitter possible. Individually configurable values. Value adjustment is optionally possible with a long signal at the input (not with the 6-byte value transmitter).
Scene auxiliary unit: Mode of operation (with or without memory function) and the scene number are adjustable.
2-channel operation: When the contact at the input closes, up to two telegrams can be sent out on the KNX. Operating concept adjustable (only channel 1 or channel 2/both channels). The mode of operation of the channels (1-bit, 1-byte, 2-byte, 3-byte, 6-byte) can be configured separately.
Controller auxiliary unit: Mode of operation (operating mode switching, forced operating mode switching, presence function and target value adjustment) configurable.
Disabling of all or individual inputs via a 1-bit object possible. Polarity of the blocking object, behaviour at the beginning and end of blocking, and behaviour during an active blocking can be adjusted.
Technical Details
Specification
KNX medium:TP256
Connections
KNX:Connection terminals to control line
Inputs:Connection terminals to control line
Load:Screw terminals
Connections:Max. 4 mm²
Inputs
Number:3
Input type:Zero-voltage
Polling voltage
Auxiliary inputs:approx. 5 V
Total length
Auxiliary input cable:max. 10 m
Ambient temperature:-5 °C to +45 °C
Rated voltage:DC 21 to 32 V SELV
Max. connected load
- Light bulbs:20 to 230 W
- HV halogen lamps:20 to 230 W
- Wound transformer:20 to 210 VA
- Tronic transformer:20 to 230 W
- Wound transformer with NV-LED:20 to 100 VA
- electronic transformer with NV-LED:typically 20 to 200 W
- HV LED lamps:typically 1 to 200 W
Properties
Properties
| Technology | KNX |
| Brand | GIRA |
