GIRA 512400

Gira RF Remote Control 4-gang KNX

Product code: 5124 00

KNX RF hand-held transmitters make the control "mobile": From any point in the house, the required KNX function can be triggered conveniently by "remote control". The KNX RF hand-held transmitters transmit KNX telegrams wirelessly when the button is pressed, depending on the parameter setting when the application program is loaded. These could include telegrams for switching/pressing, dimming, or blinds control. It is also possible to program encoder functions (dimming encoders and scene auxiliary units).

Description

The KNX RF hand-held transmitter has eight buttons and two adjacent buttons each form as a pair one rocker switch. The function of a rocker switch can be configured individually in the ETS. Each rocker switch has its own KNX communication objects and can therefore actuate KNX actuator groups separately.

The device has a two-coloured LED for indicating actuation and status. This makes it possible to indicate successful operation and sending processes. The bidirectional communication also makes it possible to temporarily indicate states of the KNX actuator immediately after an operation by means of the LED. For this purpose, the device has separate status communication objects.

The activation or status evaluation of cabled KNX systems (Medium TP) can be implemented using an media coupler, which is available as an accessory. Additionally or alternatively, suitable KNX RF actuators can be activated and evaluated directly by the KNX RF hand-held transmitter.

After the last operation, the KNX RF hand-held transmitter automatically switches to energy- saving mode after a specified time has elapsed. In energy-saving mode, the LED remains switched off. During operation, the energy saving mode is exited. The device then executes the programmed button commands.

The device is commissioned using the ETS of Version 5 or higher. Programming mode is activated by a separate programming button, located in the battery compartment. An active programming mode is displayed by the LEDs.

The radio range of the KNX RF hand-held transmitter depends on various external circumstances. The range can be optimised by selecting a suitable operating location (communication to the receiver with as few obstacles as possible). The device meets the requirements of the R&TTE directive 1999/5/EC and may be operated in all EU and EFTA countries.