GIRA
540200
System 3000 universal LED dimming insert, Comfort, 2-gang
Product code:
5402 00
Switching and dimming light bulbs, HV halogen lamps, electronic transformers for halogen or LED lamps, dimmable inductive transformers for halogen or LED lamps, HV LED or compact fluorescent lamps.
Description
- Two independent outputs for two lamp groups.
- Connecting auxiliary units is possible.
- Using a System 3000 3-wire auxiliary insert together with a System 3000 2-gang operating top unit, both outputs can be operated separately.
- Automatic or manual setting of dimming principle according to load (leading or trailing edge).
- Display of the selected operating mode using LED.
- Bulb-saving switch-on.
- Switch-on brightness can be saved permanently.
- Switch on with the last brightness set, or a saved switch-on brightness.
- Minimum brightness can be set.
- Electronic short-circuit protection.
- Electronic excess-temperature protection.
- Operation with and without neutral conductor connection.
- In general, operating the dimmer without connecting a neutral conductor is possible, although some LED and CFLi light sources require the neutral conductor connection to prevent flickering.
- For operation without a neutral conductor, the minimum load for light bulbs, HV halogen lamps, Gira Tronic transformers, and wound transformers increases to 50 W.
- Electronic transformers and ballast devices for LED lamps can be operated with the dimming procedure stated by the manufacturer.
- If the ambient temperature is higher than 25 C, the connected load must be reduced.
Technical Details
Specification
Rated voltage: AC 230 V, 50/60 Hz
Standby: 0.1 to 0.5 W
Connected load at 25C per output
- HV LED lamps (leading edge): typ. 3 to 50 W
- HV LED lamps (trailing edge): typ. 3 to 100 W
- Compact fluorescent lamp: typ. 3 to 50 W
- Light bulbs: 20 to 210 W
- HV halogen lamps: 20 to 210 W
- Gira tronic transformers: 20 to 210 W
- electronic transformer with NV-LED: typically 20 to 50 W
- Wound transformer: 20 to 210 VA
- Wound transformer with NV-LED: typically 20 to 50 VA
Auxiliary inputs
- Non-illuminated mechanical buttons: unlimited
- Auxiliary insert, 2-wire: unlimited
- Auxiliary insert, 3-wire: max. 10
Cable length
- Load: max. 100 m
- Auxiliary unit: max. 100 m
Installation depth: 30 mm
Installation: in device box pursuant to DIN 49073
Ambient temperature: -5 C to +45 C
Properties
Properties
| Technology | Standard Electrics |
| Brand | GIRA |
| Switch action | Push Button |
| Back Box | Round European |
| Buttons | 2 |
| Operating voltage | 230VAC |
