free@home Universal Dimming Actuator, 6-gang
Description
Multichannel universal dimming actuator optimised for dimming retrofit LED lamps (LEDi). Also suitable for dimming incandescent lamps, low-voltage halogen lights with conventional or electronic transformers, 230 V halogen lamps and dimmable energy-saving halogen lamps.
- Automatic load detection (can be deactivated).
- Separate N-connection per channel.
- Parallel connection of the outputs possible to increase the output power.
- Outputs can be connected in parallel in any configuration.
- Minimum load: 2 W.
- Manual operation on device also possible without bus voltage or in an unprogrammed status.
- Programming of the device also possible without applied 230V supply voltage.
- With integrated bus coupler.
- Nominal power at 230 V~ mains voltage: 230 V~ incandescent and halogen lamps: 6 x 210 W/VA to 1 x 800 W/VA.
- Dimmable 230 V~ LEDi: 6 x 210 W/VA to 1 x 800 W/VA in trailing edge control, 6 x 80 W/VA to 1 x 240 W/VA in leading edge control.
- Inductive L-transformers with LED/low-voltage halogen lamp: 6 x 210 W/VA to 1 x 800 W/VA.
- Electronic C-transformers with LED/low-voltage halogen lamp: 6 x 210 W/VA to 1 x 800 W/VA.
- Electronic LC-transformers with LED/low-voltage halogen lamp: 6 x 80 W/VA to 1 x 240 W/VA.
Technical Details
Specification
Power supply (via bus line): 24 V DC
Bus subscribers: 1 (12 mA)
Connection
- Bus connection terminal: 0.6 - 0.8 mm
- Cable type: J-Y(St)Y, 2 x 2 x 0.8 mm
- Wire stripping: 5 - 6 mm
Mains supply connector
- Wide voltage input: 110 - 230 V AC ±10%. 50 / 60 Hz +4% -6%
- Screw terminals: 1.5 - 4 mm2
- Skinning length: 8 mm
Module widths / channels: 8 MW 6 channel
Outputs: 4 or 6
Protection type: IP20
Ambient temperature: -5C - +45C
Storage temperature: -20C - +70C
Transformer for low-voltage loads:
- Loss for electronic transformers (% of lamp load): 5%
- Loss for conventional transformers (% of lamp load): 20%
Power loss
- Maximum admissible total power loss in the ON state: ² 5 W
Temperature ranges
- Ambient temperature, 100% nominal load: -5 - +45C*
- Ambient temperature, derating range: +35 - +70C
- Storage temperature: -20 - +70C
Short-circuit fuse: Electronic
Overload protection: Electronic
Thermal fuse: Not resettable
A contact-parallel illumination is not admissible. The illumination of the push-buttons is only possible with N-conductor terminal
Properties
Properties
| Technology | Other Control |
| Brand | ABB |
