JUNG
FCA2REGHE
KNX fan coil actuator, 2-gang
Product code:
FCA2REGHE
KNX Fan Coil actuator that can be configured for a 2 x 3 stage fans or 1 x 6 stage fan.
Description
Product characteristics
- Connection of a fan coil unit with up to 6 fan stages or connection of fan coil units with up to 3 fan stages respectively
- Manual output control, provisional operation
- Control options for heating, cooling or combined heating/cooling operation
- 2-pipe or 4-pipe operation
- Individual or hierarchical switching of fan stages
- Feedback
- Output state indication
- Disabling function for each channel
Modes of operation
- Bus operation: operation via touch sensors or room controller
- Temporary manual control: manual operation locally with keypad, automatic return to bus operation
- Permanent manual control mode: only manual operation locally on device
Ordering Information
- Rail mounting device, 4 rail units
- With manual electronic operation and LED status indication
- Only with the ETS 3.0d version or later versions the full functionality will be available.
- ETS product family: Heating, A/C, Ventilation
- Product type: Fan-coil
Technical Details
Specification
KNX supply: DC 21 ... 32 V SELV
Power consumption KNX: typical 150 mW
Rated voltage: AC 230/240 V ~, 50/60 Hz
Power loss: max. 3 W
Ambient temperature: _5 ... +45 C
Storing temperature: _25 ... +70 C
Connection, KNX: terminal
Connection, mains and outputs
- Connection mode: screw terminals
- single wire: 0.5 ... 4 mm_
- stranded without ferrule: 0.5 ... 4 mm_
- stranded with ferrule: 0.5 ... 2.5 mm_
Switch type: NO contact
Contact type: floating relay contacts (_ contact)
Switching voltage: AC 230/240 V ~
Breaking capacity AC1: 10 A
Breaking capacity AC3: 10 A
Switching capacities per output
Ohmic load: 2300 W
Capacitive load: 10 A / max. 140 µF
Motors: 1380 VA
Lamp loads
- Incandescent lamps: 2300 W
- HV halogen lamps: 2300 W
- LV halogen lamps with
- inductive transformers: 1200 VA
- electronic transformers: 1500 W
- Fluorescent lamps
- non-compensated: 1000 W
- parallel compensated: 1160 W / 140 µF
- lead-lag circuit: 2300 W / 140 µF
Approvals: VDE
Properties
Properties
| Technology | KNX |
| Brand | JUNG |
| Mounting | DIN Rail |
| Operating voltage | KNX Bus (29VDC) |
| Mounting Width | 4MW |
