JUNG
FM AS 16 REG
eNet radio switch/push-button actuator, 1-gang
Product code:
FMAS16REG
The eNet radio system closes the gap between conventional technology, in which devices are wired via a power cable, and networked building system technology. With the eNet Smart Home extension, switching and control of building services via smartphone, local or remote access is possible.
Description
Intended use
- Switching of lighting
- Operation with suitable eNet radio transmitters
- Operation with power supply (ref.-no. NT 1220 REG VDC) and receiver module (ref.-no. FM FK 32 REG) or eNet server
- Installation in distribution boxes on DIN rail according to EN 60715
Product characteristics
- Operating mode switch for: switch/push-button actuator or parameterisation via eNet server
- Status feedback to radio transmitter
- Scene operation possible
- Switchable output with Prog button
- Status indication with LED
Switching operation:
- Switch-on telegram: Device switches on
- Switch-off telegram: Device switches off
Push-button operation:
- Relay contact remains closed as long as ON or OFF telegrams are being received
- The maximum switch-on time is 60 seconds
Can be set with eNet server:
Supplementary functions with eNet server:
- Fully-encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
- Update of the device software
- Reading of error memory
Technical Details
Specification
Rated voltage: AC 230 V ~, 50/60 Hz
Ambient temperature: _5 ... +45 C
Switching current at AC 230 V ~
- Ohmic: 16 A
- For switching current > 10 A connecting cable 2.5 mm_
- Fluorescent lamps: 4 AX
Min. switching current AC: 100 mA
Contact type: µ
Stand-by power: max. 0.2 W
Connected load
- Incandescent lamps: 2300 W
- HV halogen lamps: 2000 W
- Electronic transformers: 1500 W
- HV LED lamps: typical 500 W
- Compact fluorescent lamps: typical 500 W
- Inductive transformers: 1000 VA
- Fluorescent lamps non-compensated: 920 VA
- Capacitive load: 690 VA (560 µF)
Connection, outputs
- Connection mode: screw terminals
- single wire: 1.5 ... 4 mm_
- stranded without ferrule: 0.75 ... 4 mm_
- stranded with ferrule: 0.5 ... 2.5 mm_
Mounting width: 36 mm (2 rail units)
Bus line
- Rated voltage: DC 12 V SELV
- Current consumption: max. 20 mA
- Connection bus: terminal
- Cable length: max. 3 m
Properties
Properties
| Technology | Wireless Control |
| Brand | JUNG |
| Mounting | DIN Rail |
| Mounting Width | 2MW |
