JUNG
FM J 50700 REG
eNet radio blinds actuator, 1-gang
Product code:
FMJ50700REG
The eNet radio system closes the gap between conventional technology, in which devices are wired via a power cable, and networked building system technology. With the eNet Smart Home extension, switching and control of building services via smartphone, local or remote access is possible.
Description
Intended use
- Controlling electrically driven blinds, shutters and awnings
- Operation with suitable eNet radio transmitters
- Operation with power supply (ref.-no. NT 1220 REG VDC) and receiver module (ref.-no. FM FK 32 REG) or eNet server
- Installation in distribution boxes on DIN rail according to EN 60715
Product characteristics
- Operating mode switch for switch-over to blind actuator, shutter actuator or parameterisation via eNet server
- Positioning of the blind and slats via scene recall
- Position for sun protection and twilight can be saved
- Status feedback to radio transmitter
- Switchable output with Prog button
- Blind/shutter running time can be saved
- Slat change-over time can be saved
- Fabric-stretching for awnings
- Status indication with LED
Can be set with eNet server:
- Change-over time for direction change
- Running direction invertible
- Operating locks
- Position for sun protection, twilight, lock-out protection and wind alarm
Supplementary functions with eNet server:
- Fully-encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
- Update of the device software
- Reading of error memory
Technical Details
Specification
Rated voltage: AC 230 V ~, 50/60 Hz
Ambient temperature: _5 ... +45 C
Minimum actuation time in operating mode
- Blind: 0.1 s
- Shutter: 0.3 s
Min. switching current AC: 100 mA
Contact type: µ
Stand-by power: max. 0.2 W
Running time: 1 ... 600 s
Running time default setting: 120 s
Slat adjusting time: 0 ... 10 s
Connected load
- Motors: 1000 W
Connection of load terminals: screw terminals
- single wire: 1.5 ... 4 mm_
- stranded without ferrule: 0.75 ... 4 mm_
- stranded with ferrule: 0.5 ... 2.5 mm_
Mounting width: 36 mm (2 rail units)
Bus line
- Rated voltage: DC 12 V SELV
- Current consumption: max. 20 mA
- Connection bus: terminal
- Cable length: max. 3 m
Properties
Properties
| Technology | Wireless Control |
| Brand | JUNG |
| Mounting | DIN Rail |
| Mounting Width | 2MW |
