4 Gang Switching actuator 16A C-load KNX

Description

Functions:

• Independent switching of the 2 outputs.

• Manual actuation of the relay independent of the bus/switching position display.
• NO contact or NC contact operation.
• Central switching function.
• Group feedback for reduction of bus load.
• Active or passive (object can be read out) cyclical feedback function.
• Feedback can be delayed until after the return of bus voltage.
• Logical linking function for each channel.
• Block function can be parameterised for each channel. As an alternative, forced setting function for each output.
• Time functions (switch-on, switch-off delay, staircase light function - also with advance warning function).
• Inclusion in light scenes possible, maximum of 8 internal scenes can be parameterised per channel.
• Memory function for light scenes.
• Elapsed-hours meter as forward/backward counter with limit function (limit can be changed via bus) can be activated for each output.
• Input monitoring for cyclical updating with safety setting.
• Reactions in case of bus voltage failure and restoration can be set for each channel following an ETS programming process.
• Current detection: Measurement of load current for each channel.
• Threshold values for load monitoring (e.g. signalling of load failure).

Switching contact: Relay with 4 x zero-voltage

closing contacts

Loading capacity

AC 230 V: 16 A/AC 1 or 16 A/AC 3

Loading capacity

AC 400 V: 10 A/AC 1 or 10 A/AC 3

DC switching capacity: 16 A/24 V

Max. switch-on current: 600 A, 150 µs

300 A, 600 µs

Connected load: 3680 W ohmic load

16 A, max. 200 µF capacitive load AC 230 V

3680 W light bulbs

3680 W HV halogen

2000 VA LV halogen, wound transformer

2500 W LV halogen, Gira Tronic

transformer

3680 VA fluorescent lamps,

not compensated

3680 VA fluorescent lamps

duo-circuit

2500 VA fluorescent lamps,

parallel-compensated

3680 W mercury-vapour lamps,

uncompensated

3680 W mercury-vapour lamps, parallel

compensated

Current detection: 0.25 to 16 A sine

50/60 Hz

Connections: Instabus via connection and branch

terminal 0595 00

load via screw terminals

0.2 to 4 mm_ single-wire

2 x 0.2 to 2.5 mm_ single-wire

0.75 to 4 mm_ fine-wire without core jacket

0.5 to 2.5 mm_ fine-wire with core jacket

Dimensions: DRA device, 4 depth modules

Technical Details

Documents & Downloads