Touch sensor 3 Plus 5-gang (2+3) System 55

Description

Push button sensor 3 Plus 5-gang

• Graphic display with back lighting and various display possibilities, e.g. temperature, time, date, alarm texts, information texts
• Multicoloured status LED (red, green, blue) can be configured via the ETS
• Two status LEDs per operating surface
• Illumination of inscription space
• Integrated temperature sensor for measuring ambient room temperature
• Installation to bus coupler 3 or bus coupler 3 external sensor
• Configuration and start-up from ETS3.0d, patch A
• Disassembly safeguard via screw fastening
• Clear inscription labels included 

Push button sensor properties:

• Rocker function or button function can be set for each operation surface
• Rocker function: switching, dimming, blind control, value transmission 1 byte, value transmission 2 bytes, scene auxiliary unit, 2-channel operation and manual fan control
• Button function: switching, dimming, blind control, value transmission 1 byte, value transmission 2 bytes, scene auxiliary unit, 2-channel operation, controller auxiliary unit, controller operation, heater clock operation and manual fan control
• Controller auxiliary unit or controller operation: operating mode changeover, (defined selection of operating mode or switching between various operating modes with controller auxiliary unit), switching of presence condition, setpoint offset
• Blocker for blocking individual buttons or rockers
• Display of an alarm message via flashing of all LEDs
• Colour of status LED (red, green, blue) is globally configurable or separately configurable in each case. A superimposed function can be activated on the bus whereby the colour and information display of an individual status LED can be modified according to priority.
• Illumination of inscription space ON, OFF, automatic switch-off or switchable via object.
• Communication object for brightness control of status LED, illumination of inscription space and backlighting of display 

Room temperature controller properties:

• Operating modes: comfort, standby, night and frost protection/ heat protection with own nominal values for temperature (for heating and/or cooling)
• Comfort extension via presence button
• Frost protection/heat protection changeover via window status or via frost protection automatic function.
• Display of room temperature controller information via device display.
• Either one or two control circuits
• Various control types can be configured according to the heating or cooling level: PI control (constant or switching PWM) or 2-point control (switching)
• Control parameters for PI controllers and 2-point controllers can be set
• Internal temperature sensor and up to two external temperature sensors (1 x object, 1 x wired) possible for room temperature measurement
• Optional external wired remote sensor 1493 00 for e.g. plaster sensor with floor heating
• Heating clock with 28 switching times 

Technical Details

Documents & Downloads

Product guides