Heat/CoolCiCtrl,3-P,2f,mO
Description
For the control of a heating or cooling circuit. The device has 2 channels, each with two electronic outputs to control a motor-driven mixing valve (3-Point) of a heating or cooling circuit as well as a relay output (5A) to switch the pump of the circuit.
Via 3 binary inputs it is possible to monitor the status of the pump (via potential free contacts) and integrate these feedbacks into the control of the pump. The flow and return flow temperature are measured and used for the calculation of the control value for the valve output in the integrated controller. The set point temperature is received via the KNX bus. By bundling both channels of the device, it is also possible to use it for double pump systems
The device has Manual operation and supports the ABB i-bus Tool for advanced diagnosis and improved commissioning.
Technical Details
Specification
- Supply voltage: KNX 29VDC <12mA
- 3 Point Motor Valve Outputs: 2
- Rated Voltage: 24V - 230VAC
- Output Current Per Rated Pair: 0.5A
- Pump Outputs: 2
- Rated Voltage: 250VAC
- Rated Current Per Output Pair: 5A
- Inputs for Temp 4
- Inputs for contact Scanning (1 mA 12 V)
- Degree of protection: IP 20 acc. EN 60529
- Din Rail Mounting
Properties
Properties
| Technology | KNX |
| Technology | KNX |
| Brand | ABB |
| Mounting | DIN Rail |
| Inputs | 10 |
| Operating voltage | KNX Bus (29VDC) |
| Outputs | 2 |
| HVAC support | Temperature Sensing + Regulation |
| IP rating | IP20 |
| Mounting Width | 8MW |
