ISE
1-000F-003
Smart Connect KNX E-Charge II
Product code:
1-000F-003
Electromobility in a KNX Smart Home is possible with dynamic load management and the Smart Connect KNX e-charge II. Easily integrate up to 5 charging points from different manufacturers into the KNX. Use the integrated load management for optimal charging.
Description
- Integration of five charging points per device
- Dynamic load management (DLM)
- Manufacturer diversity
- Mixed operation with various manufacturers
- Grid-supporting control
- Integrated RS485 adapter
- Prioritisation of one charging point
- Support for external electricity meters at charging points which are not equipped with an integrated electricity meter
- Charging status values: Charging point status (status), Connected (status), Charging (status), Charging complete (status)*, Interrupt (set/status)*, Start/Stop (set/status)*, Unlock (set)*
- Charging current status values: Target (status/set), Actual L1 - L3*, Actual (status)
- Power status values: Actual L1 - L3*, Actual (status)
- Energy status values: Actual L1 - L3, Actual (status)*
- Energy consumption status values: Last charge (status), Total (status)*
- Fault status values: Fault, Last fault
- Status values: Communication ID (EVCCID) (status)*, Charging point internal temperature (status)*, Temperature warning*, RFID tag (status)*, Serial number*, Charging point firmware version*
- KNX Secure
- Completely configurable in ETS
- Extensions via firmware updates
* Manufacturer-dependent.
Technical Details
Specification
Rated voltage: DC 24 V to 30 V
Power consumption: 2.3 W
IP communication: Ethernet 10/100 BaseT
KNX communication: KNX/TP, S-Mode
KNX medium: TP1-256
Connections:
2x RJ45 (integrated switch)
Connection and branching terminals for KNX and 24 V
RS485: Screw terminal, 3-pin (GND, A+, B-)
Ambient temperature: 0°C to +45°C
Dimensions: 2 HP (DRA plus).
Properties
Properties
| Technology | KNX |
| Brand | ISE |
| Mounting | DIN Rail |
| Operating voltage | 24VDC |
| IP rating | IP20 |
| Mounting Width | 2MW |
