JUNG 2194REGHM

KNX control unit 1-10 V, 4-gang

Product code: 2194REGHM

Control Lighting Drivers with a 1-10v interface, integrated relays for switching off which can be used seperatly if they aren't required.

Intended use

Switching and brightness setting for lamps with operating devices with 1-10 V interface
Switching of electrical loads
Mounting on DIN rail according to EN 60715 in distribution boxes

Product characteristics

Manual switching of the relays is independent of the bus/li>
Switching of capacitive loads and the resulting high switch-on currents/li>
Flexible assignment of control inputs to switching outputs, e.g. to control RGBW lamps/li>
Operation of the switching outputs as a switching actuator/li>
Connection of different phase conductors possible/li>
No additional power supply necessary/li>
Feedback of switching state and brightness value/li>
Switch position display/li>
Burn-in function for fluorescent lamps/li>
Switch-on and dimming behaviour can be set/li>
Time functions: switch-on delay, switch-off delay, staircase lighting timer with pre-warning function/li>
Integration into light scenes/li>
Operating hours counter/li>

Rated voltage KNX: DC 21 ... 32 V SELV

Current consumption KNX: max. 6 mA

Power loss: max. 4 W

Ambient temperature: _5 ... +45 ÁC

Storage/transport temperature: _25 ... +70 ÁC

Control voltage: 1 ... 10 V

Control current per output: max. 100 mA

Cable length: max. 500 m (0.5 mm_)

Contact type: floating relay contacts (_ contact)

Switching voltage AC: AC 250 / 400 V

Switching current 230 V AC1: 16 A

Switching current 230 V AC3: 10 A