KNX DALI-2 actuator Colour 4-gang
Description
Intended use
- Controlling of luminaires and other applications with DALI operating device in KNX installations e.g. electronic ballast
- Mounting on DIN rail according to EN 60715 in distribution boxes
Product characteristics
- DALI-2 certified
- Multi-master capable: additional sensors can be installed as application controllers in any DALI system
- Control of up to 128 DALI devices in 4 DALI sytems
- Broadcast control of each of the four DALI systems
- Setting of colour temperature or light colour (RGB, RGBW) for luminaires with DALI Device Type 8 acc. to IEC 62386-209
- Short-circuit, overload and overvoltage protected
- Operating hours counter
- Automatic colour circle pass or brightness pass
- Suitable for operation with DC voltage of emergency lighting systems
- Manual operation of the DALI systems
- Forced guidance of disabling function
- Collective feedback
- Central switching and dimming function
- Disabling function for each DALI system
- Separate ON and OFF delay for each DALI system
- Staircase lighting timer with switch-off warning
- Standby switch-off of the DALI devices
- KNX Data Secure compatible with ETS 5.7.7 or ETS 6.1.0 or higher
- Can be updated with the ETS Service App
Technical Details
Specification
KNX
KNX medium: TP 256
Commissioning mode: S-mode
Rated voltage KNX: DC 21 ... 32 V SELV
Current consumption KNX: 3 ... 4 mA
Connection, KNX: connection terminal
Power supply
Rated voltage: AC 110 ... 240 V ~, 50/60 Hz
Rated voltage: DC 110 ... 240 V
Power loss: max. 3 W
Power consumption: < 5 W
DALI
Rated voltage DALI: DC 15.2 V (typ.)
Output current per DALI system: typical 64 mA, max. 250 mA for short periods
Guaranteed bus current per DALI system: 80 mA
Number of DALI devices: max. 40 per DALI system ∑ DA1 ... DA4 max. 128
DALI transmission rate: 1.2 kbit/s
DALI protocol: EN 62386
Starting time: max. 5 s
Cable type: sheathed cable 230 V, e,g. NYM
Cable length DALI
with 0.5 mm²: max. 116 m
with 0.75 mm²: max. 174 m
with 1.0 mm²: max. 238 m
with 1.5 mm²: max. 300 m
Ambient conditions
Ambient temperature: −5 ... +45 °C
Storage temperature: −5 ... +45 °C
Transport temperature: −25 ... +70 °C
Mounting width: 72 mm (4 rail units)
Connection, power supply and DALI
Connection mode: screw terminals
single wire: 0.5 ... 4.0 mm²
stranded without ferrule: 0.5 ... 4.0 mm²
stranded with ferrule: 0.5 ... 2.5 mm²
Properties
Properties
| Technology | KNX |
| Brand | JUNG |
| Mounting | DIN Rail |
| Mounting Width | 4MW |
| KNX Secure | Yes |
