JUNG 36006 1S R

KNX heating actuator, 6-gang

Product code: 360061SR

Switching of electrothermal valve drives for heaters (e.g. TSA 230 NC WW, TSA 24 NC WW) or cooling ceilings

Intended use

Switching of electrothermal valve drives for heaters (e.g. TSA 230 NC WW, TSA 24 NC WW) or cooling ceilings
Mounting on DIN rail according to EN 60715 in distribution box

Product characteristics

Integrated room temperature control with setpoint specification
12 independent controllers to control up to 12 independent rooms
Controller function for heating and cooling
Switching operation or PWM operation
Valve drives with characteristics "normally open" or "normally closed" can be controlled
Valve drives for 230 V or 24 V controllable
Outputs can be operated manually, construction site mode
Feedback in manual operation and in bus operation
Disabling of individual outputs manually or via bus
Overload-protected, short circuit-protected
Error indication with LED
Protection against jamming valves
Forced position
Various setpoints for forced position or emergency operation in case of bus failure for summer or winter
Cyclical monitoring of the input signals can be parameterised
Feedback via bus, e.g. in case of power failure, overload or sensor failure
KNX Data Secure compatible with ETS 5.7.7 or ETS 6.1.0 or higher

KNX medium: TP 256
Commissioning mode: S-mode
Rated voltage KNX: DC 21 ... 32 V SELV
Current consumption KNX: 4.5 ... 10 mA

Heating outputs

Number of valve drives per output

Mounting width: 72 mm (4 rail units)
Ambient temperature: −5 ... +45 °C
Stora/transport temperature: −25 ... +70 °C