Motion Sensor 360 Pinhole - Black - Volt Free (dry contact)
Finishes:
Black
Description
This sensor has been developed for bespoke automation requirements and can only be installed in locations where the installer can access the rear of the installation surface such as wall paneling, joinery, staircases, furniture, and wall plates. The max supported panel thickness is 5mm.
The solid aluminium pinhole sensor unit features a threaded barrel with 2 disc nuts. These two nuts adjust depending on the thickness of the material to ensure a flush installation every time. The top depth setting disc has ultra-strong 3M adhesive that is affixed to the back of the mounting face, with the second threaded bolt used as a locking nut tighten against the depth setting nut to secure the pinhole sensor in place.
Inside the sturdy unit, you will find the same flawlessly reliability that our installers now expect from Faradite, as well as our ever-popular, removable push-fit connector blocks. 5V - 35V DC power and a volt free (dry contact) output which makes it as universally compatible as the rest of our Motion Sensor 360 Volt Free range.
Technical Details
Specification
Power supply (consumption): 5V-35V DC 3mA
Colour: Black
Solid state relay - max load current: 70ma
Max solid state relay - on resistance: 16 ohms
Solid state relay - off-state leakage current: 1uA
Default state: Normally open
Ambient temperature: 0-50 °C (Indoor Only)
IP Rating: IP20
Range (Note 1): 5m
Max mounting surface depth: 5mm
Adhesive tape: 3M 5952F VHB
Installation hole: 15mm
Push-fit connector: AWG 20- 24 CAT5 / CAT6 / CAT7
Standards: EN 61000-6-1, EN 61000-6-3
Properties
Properties
| Technology | Other Control |
| Brand | FARADITE |
| Colour/Material | Black |
