ABB MSA-F-1.1.1-83

free@home Movement Detector/switch actuator, 1-gang, silver

Product code: 2CKA006220A0216

For automatic switching of ABB-free@home¨ actuators dependent on movement and brightness.

With select lens for detection with animal access.
Switch-off delay of the actuator can be programmed via the web interface of the System Access Point.
For switching 127 V~/230 V~ consumers.
With integrated switch actuator.
Switching function is available also without prior programming (pre-configured).
Configuration can be changed later via the web interface (groups, scenes, etc.).
The bus can be connected via enclosed terminal block.
When installing in the flush-mounted box, a spatial division between the bus cable and 127 V/230 V installation cable is to be adhered to! If this minimum distance is not possible, use electronic boxes or insulating tubes.

Power supply: 24 V DC (via bus line)

Bus subscribers: 1 (12 mA)

Connection: Bus connection terminal: 0.4-0.8 mm Cable type: J-Y(St)Y, 2x2x0.8 mm Wire stripping: 6-7 mm

Maximum load: 10 Ax

Switched load line: 230V ~, 50 / 60 Hz; screw-type terminals: 2x2.5 mm2 rigid; 2x1.5 mm2 flexible

Opening angle: 10 Ax

Brightness limit value: 1500lux

Mounting height: 1.1m to 1.3m

Protection type: IP20

Ambient temperature: -5C +45C

Storage temperature: -20C +70C