***Important Dates: Orders for non-stock items 2nd December | Last orders for pre-Christmas Delivery 20th December | Shipping resumes 2nd January***

free@home Dimming actuator sensor, 1/1gang, Future linear
ABB SDA-F-1.1.1

free@home Dimming actuator sensor, 1/1gang, Future linear

Product code: 2CKA006220A0126
  • For dimming 230 V~ loads.
  • With integrated universal dimming actuator for controlling LEDs, incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers, and dimmable energy-saving halogen lamps.
  • For dimmable Retrofit-LEDs (LEDi).
  • Dimming function is available also without prior programming (pre-configured).
  • Configuration can be changed later via the web interface (groups, scenes, etc.).
  • For contacting 1gang rocker 6230-10-xxx, 6231-10-xxx, 6232-10-xxx, 6233-10-xxx and 6234-10-xxx.
  • The bus can be connected via enclosed terminal block.
  • When installing in the flush-mounted box, a spatial division between the bus cable and 230 V installation cable is to be adhered to! If this minimum distance is not possible, use electronic boxes or insulating tubes.
Price (Excluding VAT)
£183.67

Description

This device is a sensor/dimming actuator unit for decentralised flush-mounted installation. The device serves as both a control element as well as an actuator for the activation or dimming of electric loads.

Sensor and actuator are combined in a flush-mounted insert [1]. The sensor and switching channels have been pre-programmed at the point of delivery (button top/bottom: off/on; left rocker). However, this pre-configuration can be adjusted as required.

The integrated bus coupler makes possible the connection to the free@home bus line. After activating the bus voltage and connecting the load, it can be switched/dimmed directly on the control element.

  • Green LEDs as light for orientation/status indication
  • Exchangeable rockers with the corresponding icons.

Technical Details

Specification

Power Supply: 24 V DC (via bus line)

Bus subscribers: 1 (12mA)

Connection: Bus connection terminal: 0.4-0.8 mm

Line type: J-Y(St)Y, 2 x 2x 0.8 mm

Wire stripping: 6-7 mm

Nominal load: R,L,C: 180 W/VA, LEDi: typ. 2-80 W/VA, CFL: 2-80 W/VA

Mains supply: 230 V ~, 50 / 60 Hz; Screw-type terminals: 2 x 2.5 mm2 rigid; 2 x 1.5 mm2 flexible

Protection: IP20

Ambient temperature : -5 C +45 C

Storage T: -20 C +70 C

Properties

Properties

Technology Other Control
Brand ABB
Operating voltage 24VDC
IP rating IP20
Ivory Egg uses cookies to make your experience better and provide necessary site functionality. By using our website, you agree to set the cookies and accept the privacy policy