IR Quattro Slim XS KNX Presence Detector, Square
Description
Our slimmest presence detector. Now even smaller in concealed box format.
Due to popular demand. The extra slim IR Quattro SLIM XS presence detector virtually disappears in the wall or ceiling. Thanks to the new and practical concealed box format it forms a remarkably unobtrusive symbiosis with the ofifice environment and can now be installed in any standard concealed box. In short: our slimmest presence detector would seem to be pretending it wasn't even there - and yet is absolutely present when it matters. To be prepared for any situation, a round SLIM XS is also available.
Technical Details
Specification
European Article Number (EAN): 4007841033033
Dimensions: 80 x 80 x 49 mm
Model: Presence detector
Sensor type: Passive infrared
Power supply: KNX bus voltage
Recommended installation height: 2.5-4 m
Sensor system: PIR with retina lens and hexagonal Fresnel structure
Can be connected in parallel: Yes
Application: inside buildings
Installation: Ceiling
Detection angle: 360°
Settings: by means of ETS software, remote control or bus
Square presence detection zone: 4 x 4 m max. (16m²)
Square radial detection zone: 4 x 4 m max. (16m²)
Square tangential detection zone: 4 x 4 m max. (16m²)
Lighting channels Light 1 – Light 4: Switching/dimming, switching mode, constant lighting control, stay-ON time
Basic brightness: Permanently ON, 1 – 255 min, 10-50% = all night
Switch-'ON' delay: Room surveillance, 0-255 min., Stay-ON time 1-255 min.
Presence stay "ON" time output: 1-255 sec. or 1-255 min.
HVAC output: depending on presence
Further outputs: Light level, sabotage protection
Light level output: in lux
IP rating: IP20
Temperature range: 0-+40
IQ mode: Yes
Housing: UV-resistant, paintable
Properties
Properties
| Technology | KNX |
| Brand | STEINEL |
| Buscoupler | Integrated |
| IP rating | IP20 |
| Motion Sensor | Passive Infra Red |
