THEBEN
FCA 2 KNX
KNX fan coil actuator
Product code:
4920210
With the fan coil actuator FCA 2 KNX, Theben presents a fan coil actuator for efficient heating control. It supports 2 and 4 pipe systems and is, for instance, optimally suited for the use in hotel rooms, office buildings, and apartment complexes. Proportionally controllable control valves and fan (0-10 V) ensure precise temperature control. Via the switch outputs, the fan can be controlled in three increments. Two inputs can be used for condensation monitoring and for connecting an external temperature sensor or window contact. The KNX actuator can be used universally for voltages from 100-240 V and 50-60 Hz. Thanks to the adjustable restart delay, small split units can also be controlled.
Description
- For controlling fan coils
- For 2 and 4 pipe systems
- For up to three fan stages
- Optionally with 0-10 V fan control
- For proportional 0-10 V valves
- Additional relay for electrical heater or cooler bank
- Potential-free input for window contacts or temperature sensor
- Potential-free, condensation monitoring
- Display of operation status via 9 LEDs
- Manual operation on device (fan satges, switching between heating and cooling)
- Adjustment of setpoint value for cooling in relation to external temperature
- Potential-free switching contact for either cooler or heater bank
- With emergency program
Technical Details
Specification
Technical data
| Operating voltage KNX | Bus voltage, ≥8 mA |
| Operating voltage | 100 - 240 V AC |
| Frequency | 50 - 60 Hz |
| Width | 4 modules |
| Installation type | DIN rail |
| Type of contact | NO contact |
| Switching capacity additional relay | 16 A |
| Switching capacity blower relay | 6 A |
| Ambient temperature | -5 °C … +45 °C |
| Type of protection | IP 20 |
| Protection class | II according to EN 60 730-1 |
Properties
Properties
| Technology | KNX |
| Brand | THEBEN |
| Mounting | DIN Rail |
| Operating voltage | 230VAC |
| Outputs | 7 |
| IP rating | IP22 |
| Mounting Width | 4MW |
