ZENNIO
ZDI-DBDX2
DIMinBOX DX2. Universal dimmer actuator. 2 channels x 310W or 1 channel x 600W
Product code:
ZDI-DBDX2
Universal Dimming actuator (RLC, LED, CFL): 2 channels for up to 310W or 1 channel for up to 600W @ 230VAC (2 channels for up to 200W or 1 channel for up to 400W @ 110-125VAC).
Description
Auto load type detection (RLC). Configurable dimming curves for LED and CFL. It allows manual control of its outputs thanks to the push buttons on the cover. It includes 10 independent logical functions. In addition, it incorporates 2 analog-digital inputs that may be configured as binary inputs for sensors and potential-free push buttons, as temperature probe inputs or as motion sensor inputs. Error detection: short circuit, voltage surge, overheating, anomalous frequency, supply voltage failure, open circuit, parameterization error.
Features
- 2 Channel for R L C loads and for dimmable CFL and LED lamps
- Automatic detection of R L C load type
- Dimming pattern selection for CFL and LED lamps
- Optional manual dimming control
- 2 analog/digital inputs
- Total data saving when power failure occurs
- Size: 60 x 90 x 80mm (40.5 DIN rail units)
- To be mounted in electrical panels with DIN rails
- KNX BCU integrated
- CE directive compliant
Technical Details
Specification
General System Specifications
- KNX Power Supply: 29VDC
- KNX Current Consumption: 8.8mA @ 29VDC
- External power supply: 110-125VAC or 230VAC (50 or 60Hz)
- Operating temperature: -5 C to 45 C
- Assembly: To be mounted inside distribution boxes or electrical panels with DIN rail.
- Power failure response: Data saving
- Operation Indicator:Programming LED (red) ON when pushing the programming button. Test LED (green) ON when device is in Test mode.
Inputs
- Number of inputs per common: 2
- Input voltage: +3.3VDC for the common
- Input current: 1mA @ 3.3VDC (each input)
- Input impedance: Approx. 3.3k ½
- Switching type: Dry voltage contacts between input and common
- Connection method: Cable screw terminal
- Max. cable length 30m
- NTC probe length: 1.5m
- NTC accuracy (@ 25 C): 0.5 C
- Temperature measure resolution: 0,1 C
- Cable cross-section: 0,15mm to 1.5mm
- Response time: Max 10ms
Outputs
- Contact type: Solid state switching device
- Load protection: Yes; overheating, voltage surge and short-circuit protection.
- Dropping voltage: Negligible
- Connection type: Cable screw terminal
- Recommended cable section: 1.5mm to 2.5mm
- Cable type: Stranded or solid wire
- Response time: Negligible
Loads & Power (@ 25 C)
- RLC Individual channel: 5-310W (230 VAC), 5-200W (110-125 VAC)
- RLC Common channel: 20-600W (230VAC), 20-400W (110-125 VAC)
- CFL and LED Individual channel: 5-200W (230VAC), 5-200W (110-125 VAC)
- CFL and LED Common channel: 10-400W (230VAC), 10-400W (110-125 VAC)
Properties
Properties
| Technology | KNX |
| Brand | ZENNIO |
| Mounting | DIN Rail |
| Inputs | 2 |
| Operating voltage | 230VAC |
| Outputs | 2 |
| IP rating | IP20 |
| Mounting Width | 5MW |
