ZENNIO
ZCLDIV2
KLIC-DI V2. Daikin-KNX gateway (SKY and VRV range)
Product code:
ZCLDIV2
Zennio gateway to control Daikin commercial and industrial air-conditioning units from KNX system in a bidirectional way. It includes 2 analog-digital inputs for temperature probes, motion sensor or dry contact binary inputs (switches, sensors or push buttons) and 10 logical functions. 2 DIN rail units. Accessories: temperature probe and motion sensor.
Description
- Bidirectional communication with Daikin HVAC units
- 2 analog/digital inputs
- 10 logic functions
- Total data saving on KNX bus failure
- Integrated KNX BCU (TP1-256)
- Dimensions 67 x 90 x 36 mm (2 DIN units)
- DIN rail mounting according to IEC 60715 TH35, with fixing clamp
- Conformity with CE, UKCA, RCM directives (marks on the right side)
Technical Details
Specification
General System Specifications
- KNX Power Supply: 29VDC
- KNX Current Consumption: 8.3mA @ 29VDC
- Operating temperature: 0C to 55C
- Assembly: Independent control assembly device to be
- mounted inside distribution boxes or electrical panels. Interface should be installed outside the air conditioning indoor unit.
- Connection KLIC-DI with A/C unit: No-polarity 2-wire cable, max. length equal to 500m (not provided)
- Minimum clearances: Not required
- Response to bus voltage failure: Complete data saving
- Response to bus failure recovery: Data recovery and commands sending as programmed
- Operation indicator: Programming LED indicates programming mode (red), safe mode (blinking red) or duplex communication with the air conditioning unit (blinking green/blue). If there is an error in the communication terminal, it lights in continuous green.
Properties
Properties
| Technology | KNX |
| Brand | ZENNIO |
| Mounting | DIN Rail |
| Operating voltage | KNX Bus (29VDC) |
| IP rating | IP20 |
| Mounting Width | 2MW |
