DALIBOX Interface 64 X2. KNX-DALI Interface for up to 64 ballast and 64 groups - 2 channels
Description
- Possibility of controlling up to 64 DALI ballasts in up to 64 lighting groups
- Groups 17-364 can only have one ballast per group.
- Groups 1-16 can have any number of ballasts
- Single Master DALI-2 Controller
- Compatibility with emergency lighting and color ballasts (DT8).
- Scene sending and saving
- Error detection and monitoring
- Burn-in, Stand-by and Auto-off functions
- Manual control through buttons and status indication through display
- 1.54” display (128 x 64 pixels) for settings and notifications
- External power supply of 110-240 VAC 50/60 Hz
- Total data saving on KNX bus failure
- Integrated KNX BCU (TP1-256)
- Size 67 x 90 x 79 mm (4.5 DIN units)
- DIN rail mounting according to IEC 60715 TH35, with fixing clamp
- DALI Standard certified
- Conformity with the CE, UKCA, RCM directives (marks on the right side).
Technical Details
Specification
KNX supply
Voltage (typical): 29 VDC SELV
Voltage range: 21-31 VDC
Connection type: Typical TP1 bus connector for 0.8 mm Ø rigid cable
Maximum consumption:
29 VDC (typical): 6.2mA, 179.8mW
24 VDC: 10mA, 240mW
External power supply
Voltage: 110-240 VAC 50/60 Hz PF=0.5
Maximum consumption: 82 mA @ 110 VAC / 52 mA @ 230 VAC
Operation temperature: -5 .. +45 °C
Storage temperature: -20 .. +55 °C
Operation humidity: 5 .. 95%
Storage humidity: 5 .. 95%
Complementary characteristics: Class B
Protection class / Overvoltage category: II / III (4200 V)
Operation type: Continuous operation
Device action type: Type 1
Electrical stress period: Long
Degree of protection: IP20, clean environment
Installation: Independent device to be mounted inside electrical panels with DIN rail (IEC 60715)
Minimum clearances: Not required
Response on KNX bus failure: Data saving according to parameterization
Response on KNX bus restart: Data recovery according to parameterization
Operation indicator: The programming LED indicates programming mode (red). The power supply LED indicates external power (green). Display allows both configuring the DALI system and supervising the current status.
Weight: 195 g
PCB CTI index: 175 V
Housing material: PC FR V0 halogen free.
Properties
Properties
| Technology | KNX |
| Brand | ZENNIO |
| Mounting | DIN Rail |
| Operating voltage | 230VAC |
| Mounting Width | 4.5MW |
