ZENNIO
ZIO-MN45V3
MINiBOX 45 V3. KNX multifunction actuator - 4 outputs 16A / 5 inputs A/D
Product code:
ZIO-MN45v3
Multifunction actuator for DIN rail (2 units) with 4 outputs (16A C-load) which offers multiple configurations as shutter channels and individual outputs. It allows manual control of its outputs thanks to the push buttons on the cover and includes a logical function module. MINiBOX 45 also incorporates 5 analog-digital inputs that may be configured as binary inputs for sensors and potential-free push buttons, as temperature probe inputs or as motion sensor inputs, as well as four room thermostats to control heating/cooling systems.
Description
- 4 outputs configurable as: 2 shutter channels or 4 individual outputs.
- Suitable for capacitive loads, maximum 140 μF.
- 5 analog/digital inputs.
- Manual output operation with push button and LED status indicator.
- Logical functions included.
- Output timing facilities.
- Total data saving on power failure.
- Size 67 x 90 x 35 mm (2 DIN units).
- KNX BCU integrated.
- DIN rail unit assembly (EN 50022), with snap fit clamp.
- Possibility to connect different phases in adjoining outputs.
- CE directives compliant.
Technical Details
Specification
General System Specifications
- KNX Power Supply: 29VDC
- KNX Current Consumption: 70.5mA @ 29VDC
- Operating temperature: 0 °C to 55 °C
- Assembly: Independent control assembly device to be mounted inside of electrical panels with DIN rail (EN 50022).
- Response to Bus Voltage Failure: Data saving and relays action according to parameterization.
- Response to bus failure recovery: Data recovering and output status change according to parameterization.
- Operation indication: Programming LED indicates programming mode (red) and test mode (green). Output status LED indicators reflect current output state.
Outputs
- Contact type: Potential free outputs through bistable relays with tungsten pre-contact.
- Disconnection type: Micro-disconnection
- Rated current by output: 16(6)A * 250V AC (4000 VA) 16(6)A * 30V DC (480W)
- Maximum inrush current: 800A/200μs (fluorescent lamps), 165A/20ms (resistive lamps)
- Number of outputs: 4 outputs
- Outputs per common (Channel) 1 individual output
- Total max current in device: 40A
- Max Power - Resistive Load: 4000W
- Max Power - Inductive Load: 1500VA
- Connection type: Cable screw terminal
- Recommended Cable Section: 0.5 mm2 to 4 mm2
- Cable Type: Stranded or Solid Wire
- Maximum Response Time: 50ms
- Expected Life - Mechanical: 3 million operations (60cpm)
- Expected Life - Electrical: 100.000 cycles (6cpm with resistive load)
Inputs
- Number of inputs per common: 5
- Input voltage: +3.3V DC for the common
- Input current: 1.0mA @ 3.3V DC (each input)
- Input impedance: Approx. 3.3kohm
- Switching type: Dry voltage contacts between input and common
- Connection method: Cable screw terminal
- Max. cable length: 30 m.
- NTC probe length: 10.5 m (up to 30m)
- NTC accuracy (@ 25 °C): 0.5 °C
- Temperature measure precision: 0.1 °C
- Cable cross-section: 0.5 mm to 20.5 mm (24-12 AWG)
- Response time: Max 10ms
Properties
Properties
| Technology | KNX |
| Brand | ZENNIO |
| Mounting | DIN Rail |
| Inputs | 5 |
| Operating voltage | KNX Bus (29VDC) |
| Outputs | 4 |
| IP rating | IP20 |
| Mounting Width | 2MW |
