ZENNIO
ZIOMN40V3
MINiBOX 40 v3. KNX multifunction actuator - 4 outputs 16A
Product code:
ZIO-MN40V3
Multifunction actuator for DIN-rail (2 units) with 4 outputs (16 A C-load) which offer multiple configurations as shutter channels, individual outputs or even 2-pipes fan coil controller. It allows manual control of its outputs through the push buttons on the cover and includes a logical function module.
Description
- 4 configurable outputs: shutter channels (up to 2), individual outputs (up to 4) and 2-pipe fan coil control (up to 1)
- Outputs suitable for capacitive loads, maximum 140 µF
- Supports KNX Data Secure
- Manual output operation with push button and LED status indicator
- 10 logic functions
- Output timing
- Total data saving on KNX bus failure
- Integrated KNX BCU (TP1-256)
- Dimensions 67 x 90 x 36 mm (2 DIN units)
- DIN rail mounting according to IEC 60715 TH35, with fixing clamp
- Possibility of connecting different phases in adjacent outputs
- Conformity with the CE, UKCA, RCM directives (marks on the right side).
Technical Details
Specification
General System Specifications
- KNX Power Supply: 29VDC
- KNX Current Consumption: 70.5mA @ 29VDC
- Operating temperature: 0 C to 55 C
- Assembly: Independent control assembly device to be mounted inside of electrical panels with DIN rail (EN 50022).
- Response to Bus Voltage Failure: Data saving and relays action according to parameterization.
- Response to bus failure recovery: Data recovering and output status change according to parameterization.
- Operation indication: Programming LED indicates programming mode (red) and test mode (green). Output status LED indicators reflect current output state.
Outputs:
- Number of outputs: 4 outputs
- Contact type: Potential free outputs through bistable relays with tungsten pre-contact.
- Disconnection type: Micro-disconnection
- Rated current by output: 16(6)A * 250V AC (4000 VA), 16(6)A * 30V DC (480W)
- Maximum inrush current: 800A/200 microsecond (fluorescent lamps), 165A/20 millisecond (resistive lamps)
- Outputs per common (Channel): 1 individual output
- Total max current in device: 40A
- Max Power - Resistive Load: 4000W
- Max Power - Inductive Load: 1500VA
- Connection type: Cable screw terminal
- Recommended Cable Section: 0.5 mm2 to 4 mm2
- Cable Type: Stranded or Solid Wire
- Maximum Response Time: 50ms
- Expected Life - Mechanical: 3 million operations (60cpm)
- Expected Life - Electrical: 100.000 cycles (6cpm with resistive load)
Properties
Properties
| Technology | KNX |
| Brand | ZENNIO |
| Mounting | DIN Rail |
| Operating voltage | KNX Bus (29VDC) |
| Outputs | 4 |
| IP rating | IP20 |
| Mounting Width | 2MW |
| KNX Secure | Yes |
