ZENNIO
ZIOSHD4
4-Channel Shutter Actuator with automatic travel time measurement and KNX Secure
Product code:
ZIOSHD4
4-channel shutter actuator for DIN rail (4 units), which allows automatic travel times measurement through current detection.
It includes 6 alarms per channel, a module of 20 logic functions and allows manual control of the outputs with LED status indication. Among its complete functionality, the event-driven automatic control stands out, calculating the position of the sun at each moment to be able to adjust the position of the shutter and the slats.
Description
- Up to 4 shutter channels
- Automatic travel time measurement through current detection (only possible when using AC powered shutters)
- Possibility of controlling blinds/shutters with 2 or 3 dry contacts*
- Manual output operation with push button and LED status indicator
- Supports KNX Data Secure
- 20 logic functions
- Output timing
- Total data saving on KNX bus failure
- Integrated KNX BCU (TP1-256)
- Dimensions 67 x 90 x 70 mm (4 DIN units)
- DIN rail mounting according to IEC 60715 TH35, with fixing clamp
- Possibility of connecting different phases in adjacent outputs
- Conformity with the CE, UKCA, RCM directives (marks on the right side)
Technical Details
Specification
General System Specifications
- KNX Power Supply: 29VDC
- KNX Current Consumption: 11mA @ 29VDC
- Operating temperature: 0 °C to 55 °C
- Assembly: Independent control assembly device to be mounted inside of electrical panels with DIN rail (EN 50022).
- Response to Bus Voltage Failure: Data saving and relays open
- Response to bus failure recovery: Data recovering and output status change according to programming.
- Operation indication: Programming LED indicates programming mode (red) and test mode (green). Output status LED indicators reflect current output state.
Outputs:
- Contact type: Potential free outputs through bistable relays.
- Disconnection type: Micro-disconnection
- Rated current by output: 10A (5) * 250V AC (2500 VA), 10A * 30V DC (300W)
- Number of outputs per common: 4 shutter channel
- Different phases connection: Possibility to connect different phases in adjoining shutter channel outputs (see "wiring and assembly diagrams" section)
- Max Power - Resistive Load: 2000W
- Max Power - Inductive Load: 1000VA
- Connection type: Cable screw terminal
- Recommended Cable Section: 0.5 mm to 2.5 mm (26-12 AWG)
- Cable Type: Stranded or Solid Wire
- Maximum Response Time: 15ms
- Expected Life - Mechanical: 1 million operations (180cpm)
- Expected Life - Electrical: 100000 cycles (6cpm with resistive load)
Properties
Properties
| Technology | KNX |
| Brand | ZENNIO |
| Mounting | DIN Rail |
| Operating voltage | KNX Bus (29VDC) |
| Outputs | 4 |
| IP rating | IP20 |
| Mounting Width | 5MW |
