EyeZen TP. KNX motion detector with luminosity sensor - anthracite

ZENNIO ZPDEZTPV2A

EyeZen TP. KNX motion detector with luminosity sensor - anthracite

Product code: ZPDEZTPV2A

Finishes:

Anthracite

Motion detector with luminosity sensor for ceiling mounting, with a detection area of 360º and up to 6 meters diameter. It includes several channels to be configured for constant luminosity regulation, lighting switching control according to luminosity threshold or according to motion detection only. Sensitivity settings can be adjusted for each sensor individually and luminosity can be calibrated to the working environment values. Master/slave configuration allows using several detectors for larger areas. Flush mounted.

Description

Presence detection through PIR technology.
Detection diameter of up to 6m.
Lighting level sensor with human eye spectral sensitivity.
6 presence detector channels.
2 constant light regulation channels.
Occupancy detection.
10 logic functions.
Total data saving on KNX bus failure.
Integrated KNX BCU.
Dimensions: Ø48.3 x 41mm.
Cutting diameter (hole saw blade): Ø51mm.
False-ceiling flush-mounted.
Conformity with the CE directives (CE-mark on the back side).

Technical Details

Specification

Type of device: Electric operation control device

KNX supply:

Voltage (typical): 29VDC SELV
Voltage range: 21..31VDC

Maximum consumption:

29VDC (typical): 4mA, 116mW
24VDC1: 10mA, 240mW

Connection type: Typical TP1 bus connector for 0.80mm Ø rigid cable

External power supply: Not required

Operation temperature: 0oC .. +45oC

Storage temperature: -20oC .. +55oC

Operation humidity: 5 .. 95%

Storage humidity: 5 .. 95%

Protection class: III

Operation type: Continuous operation

Device action type: Type 1

Electrical stress period: Long

Complementary characteristics: Class B

Degree of protection: IP20, clean environment

Installation: Flush-mounted on false ceiling.

Minimum clearances: Not required

Response on KNX bus failure: Data saving according to parameterisation

Response on KNX bus restart: Data recovery according to parameterisation

Operation indicator: The programming LED indicates programming mode (red). The motion sensor initialisation, after powering up the device, is indicated through the detection LED (red blinking). The motion detections are indicated by a red flash (in case the LED is enabled).

Weight: 39g

PCB CTI index: 175V

Housing material: PC/ABS FR V0 halogen free housing and HDPE lens