ZENNIO
ZRX-KCI4S0
KCI. KNX Interface for 4 consumption meters with S0-pulse outputs
Product code:
ZRXKCI4S0
KNX Consumption Interface (KCI) is the Zennio KNX interface for four consumption meters with S0-pulse outputs to monitor their electricity (energy and power), water and/or gas (volume and flow rate) consumption measure in the KNX bus. A removable battery allows buffering S0 pulses during a KNX power failure and recovers the real consumption afterwards. LED indicators make the user able to check the existence of communication through each S0 channel, as well as the battery status (low battery and/or run out of battery), which is also indicated in the KNX bus.
Description
- 4 channels for consumption counters (meters) with S0-pulse outputs (UNE-EN 62053-31)
- Compliant with UNE-EN 62053-31 Class B.
- DIN rail unit assembly (EN 50022), with snap fit clamp.
- Size 90 x 60 x 35 mm (2 DIN units).
- KNX BCU integrated.
- Total data saving on KNX bus power failure.
- CE directives compliant.
Technical Details
Specification
General System Specifications
- KNX Power Supply: 29VDC
- KNX Current Consumption: 13.2mA @ 29VDC
- Operating temperature: 0 C to 45 C
- Assembly: Independent control assembly device to be mounted inside of electrical panels with DIN rail (EN 50022)
- KNX bus failure response Data saving
- Response when restarting KNX bus Data recovering and sending according to parameterization when recovering
- Operation indicator: Programming LED indicates programming mode (red) or safe mode (blinking red). LOW and EMPTY batt. LED indicate the battery level when blinking in red (KNX supply necessary). LED input indicator blinks when a pulse is received.
Inputs:
- Number of S0 or dry inputs: 4
- Minimum pulse length: 30ms
- Inputs connection: Terminal block (screw)
- Inputs per common: 2
- Recommended cable section: 0.25 mm to 20.5 mm
- Max. cable length: 30m
- Cable type: Stranded or solid wire
- Operating voltage: 6VDC
Properties
Properties
| Technology | KNX |
| Brand | ZENNIO |
| Mounting | DIN Rail |
| Inputs | 4 |
| Operating voltage | KNX Bus (29VDC) |
| IP rating | IP20 |
