IWAC OUT In Wall Access Controller, Outdoors, White with doorbell
Finishes:
Description
IWAC Out incorporates KNX Secure for a secure door opening in the communication with an actuator, which must be compatible with KNX Secure.
Made of a high-impact resistant polycarbonate, which makes the device fit for outdoors, and its installation is very easy (only KNX bus). By means of the upper LED, allow/deny access and room status (DND/MUR) are notified: it is possible to know by the led colouring if the room is occupied as well as if the guest has selected Do Not Disturb or Make Up Room status.
- Room access control through NFC technology access cards (MIFARE DESFire EV1 and MIFARE Classic) and Bluetooth communication
- Supports KNX Data Security
- 1 touch area
- Luminosity and proximity sensor
- Customizable color access LED indicator
- Total data saving on power failure
- Integrated KNX BCU (TP1-256)
- Dimensions 85.6 x 85.6 x 16.8 mm
- Indoor or outdoor installation
- IP56 and IK07 degree of protection
- Surface installation
- •Conformity with CE, UKCA, RCM directives (marks on the back side)
Technical Details
Specification
KNX supply
Voltage (typical): 29VDC SELV
Voltage range: 21..31VDC
Maximum consumption: 29VDC (typical) 15.3mA. 443.7mW. 24VDC 17.5mA. 420mW
Connection type: Two wire cable with exterior jacket (UL20251 - 22AWG)
External power supply: Not required
Operation temperature: -25C .. +55C
Storage temperature: -25C .. +55C
Operation humidity: 5 .. 95%
Storage humidity: 5 .. 95%
Complementary characteristics: Class B
Protection class: III
Operation type: Continuous operation
Device action type: Type 1
Electrical stress period: Long
Degree of protection: IP56, clean environment
Installation: Surface mounted with screws.
Minimum clearances: Not required
Response on KNX bus failure: Data saving according to parameterization
Response on KNX bus restart: Data recovery according to parameterization
Operation indicator: According to its parameterization, the access LED can show the room status and temporally change its color when a NFC card is detected. Additionally, it indicates programming mode (steady red).
Weight: 126g
PCB CTI index: 175V
Housing material: PC+ABS FR V0 halogen free
Properties
Properties
| Technology | KNX |
| Brand | ZENNIO |
| Colour/Material | White |
| Buscoupler | Integrated |
| IP rating | IP56 |
| KNX Secure | Yes |
