Presentia W0 V2. KNX presence detector for wall mounting - White
Finishes:
Description
FEATURES
- Presence Detector (PIR) with 2 adjustable-sensitivity sectors
- Detection length of up to 10m
- Lighting level sensor
- 6 presence detection channels
- Occupancy detection
- 10 logic functions
- Total data saving on KNX bus failure
- Integrated KNX BCU
- Dimensions 55.5 x 55.5 x 40mm
- Flush-mounted in back box with trim frame
- Conformity with the CE directives (CE-mark on the back side)
Installation in standard mounting box with 55x55 frames of 1/2/3/4 module (white, anthracite or silver - ZS55). Frame not included.
Technical Details
Specification
KNX supply
Voltage (typical): 29VDC SELV
Voltage range: 21..31VDC
Maximum consumption
29VDC (typical): 5.3mA, 153.7mW
24VDC: 10mA, 240mW
Connection type: Typical TP1 bus connector for 0.80mm rigid cable
External power supply: Not required
Operation temperature: 0C .. +45C
Storage temperature: -20°C .. +55°C
Operation humidity: 5 .. 95%
Storage humidity: 5 .. 95%
Complementary characteristics: Class B
Protection class: III
Operation type: Continuous operation
Device action type: Type 1
Electrical stress period: Long
Degree of protection: IP20, clean environment
Installation: Flush mount on back box
Minimum clearances: Not required
Response on KNX bus failure: Data saving according to parameterization
Response on KNX bus restart: Data recovery according to parameterization
Operation indicator
The programming LED indicates programming mode (red).
The motion sensor initialization, after powering up the device, is indicated through the detection LED (red blinking).
The motion detections are indicated by a red flash (in case the LED is enabled).
Weight: 71g
PCB CTI index: 175V
Housing material: PC FR V2 halogen free housing and HDPE lens
Properties
Properties
| Technology | KNX |
| Brand | ZENNIO |
| Colour/Material | White |
