KNX IP Router 750
Description
The KNX IP Router forwards telegrams between different lines via LAN (IP) as a fast backbone. With it this device compensates the EIB/KNX line coupler. The KNX IP Router can also be used in ETS3 and ETS4 as a programming interface. There are two ways to assign an IP-address, get the IP-address from a DHCP-server or configure it with ETS (as ETS parameter). It has an external 12 V to 24 V Power Supply or can alternatively be powered via Power-over-Ethernet (IEEE 802.3f).
In addition this device is suited to connect a PC to the KNX network e.g. for ETS programming. The IP address can be obtained by a DHCP server or by manual configuration (ETS) respectively. This device works according to the KNXnet/IP specification using the core, the device management, the tunnelling and the routing part. The KNX IP Router 750 has a filter table and is able to buffer up to 150 telegrams.
Technical Details
Specification
Technical data
- Housing: plastic
- DIN rail mounted device, width: 2 TE
Controls
- Learning key for EIB/KNX
Indicators
- Lerning LED (red)
- Signal LED (green) for EIB/KNX
- Signal LED (green) for LAN
Ethernet
- 10BaseT (10Mbit/s)
Power supply
- External power supply 12-24V AC or 12-30V DC
- Alternative: 'Power-over-Ethernet'
- Power consumption: < 800 mW
Connectors
- EIB/KNX connector
- LAN RJ-45 socket
- Screw connector for power supply
Properties
Properties
| Technology | KNX |
| Brand | WEINZIERL |
| Mounting | DIN Rail |
| IP rating | IP20 |
| Mounting Width | 2MW |
